- Oil drainer with vacuum to extract oil via the dipstick
- 80L reservoir
- Oil level indicator tube
- Telescopic tube adjusts from 1200mm to 1950mm
- Extra large diameter drain pan & removable filter
- Safe air discharge of oil from tank
- No lifting, pouring or spillage
- For use on gearbox oil, automatic transmission oil & in motorcycles, in addition to normal engine oil draining
- Supplied complete with suction hose
- 4 industrial castors - 2 swivel, 2 braked
-
Sale!
-
Sale!
- Unique Patented ratcheting system for fast and easy removal of brake pipe nuts and inline nuts
- Can be opened and closed to fit around the nut completely
- The unique design ensures the greater pressure = greater grip - ideal for worn or rounded nuts
- Double ended wrenches with flex head on each end
- Sizes: 8x9mm, 10x11mm, 12x13mm, 14x15mm
-
Sale!
Tests Antifreeze, battery acid, AdBlue, & screenwash Automatic temperature compensation Adjustable eyepiece for easy focusing Supplied in sturdy plastic case, complete with pipette & pouch -
Sale!
• Tests antifreeze, battery acid and screen wash • Supplied in sturdy plastic case • Complete with pipette and pouch • Adjustable eyepiece for easy focusing -
Sale!
- Set of two adaptors to increase the range coverage of an existing relay tester
- The adaptor plugs into the relay tester & the relay to be tested then plugs into the appropriate adaptor
- For 4 & 5 pin relays as commonly used for fuel pumps and other powered components
-
Sale!
- Set of 3 adaptors which allow an existing relay tester to test shielded relays
- The shielded relay adaptor plugs into the same pin sockets as the normal relay and then the shielded relay then plugs into the adaptor
- Fits into any of the three 4 & 5 pin sockets on the relay tester
-
Sale!
The Roki wire brush range has been manufactured in co-operation with the automobile industry, designing for cleaning off clogged lining deposits when changing brake pads linings. This brush is very slim with crimped brass wire filling, made this way to prevent damage to sensitive brake areas during use. Heavy duty brake caliper brush with 2 rows of heavy duty brass wire fill and ergonomic handle -
Sale!
- Solid rubber blocks to be used on EV Battery Lifts
-
- Suede upper
- Steel toe cap
- Dual density polyurethane sole
- Penetration resistant midsole
- Oil resistant sole
- Sizes 8-11 in stock, other sizes available to order
-
Sale!
This poster gives basic advice on what to do in an emergency when someone has an electric shock. Printed on a flexible PVC panel, to ensure good moisture and dirt resistance. Suitable for use in any workplace. -
- Suede upper
- Steel toe cap
- Dual density polyurethane sole
- Penetration resistant midsole
- Oil resistant sole
- Sizes: 8-11 in stock, other sizes available to order
-
Sale!
- Pneumatic design provides simple and easy extraction.
- Transparent twin cylinder, easy to monito fluid separation process.
- Specification:
- Dimension: 560mm x 420mm x 1020mm
- Capacity: 8 – 8L, High – 1250mm
- Measurement: 560mm(L) x 400mm(D) x 1340mm(H)
- Weight: 33.14kg
- Power Source: Pneumatic / Air
- Made In Taiwan
-
- Made from chrome vanadium steel
- Ultra-smooth 72-tooth ratchet for action use in confined areas - 1/4" - 3/8" - 1/2" sq dr
- Features: Flip reverse, push-button quick release, offset handle with comfort grip
-
Sale!
- Comprehensive set of tools for dismantling & installing shock absorber strut assemblies
- Includes 9 special sockets & 25 bit inserts for releasing strut top nuts; 14-27mm sockets & slotted/torx/D shape/ hex male & female strut top bit inserts
- Also includes 5x traditional strut nut sockets (Audi, Rover, VAG etc)
-
Sale!
- Universal protective clamp retains the piston rod in extended position
- Clamp has short and long screws to cover wide range of piston diameters:12-28mm
- Selection of hose connectors and brake bleed nipple adaptors
-
Sale!
- Makes life easy when working on shock absorbers with internal rebound stop springs
- Saves times when assembling new shock absorbers
- Universal protective clamp retains the piston rod in extended position
- Clamp has short & long screws to cover wide range of piston diameters: 12-28mm
- Telescopic handles makes it easy to assemble the new piston
-
Sale!
- Enables removal of flange type rear axle hubs from most vehicles & lightweight commercials
- Can be used on bolts up to 14mm diameter
- Fits 4-,5- or 6- bolt patterns and stud circles from 108mm to 141mm
- Hub pulling plate with 2.25kg slide hammer assembly
-
Sale!
- Slide Hammer Hub Puller - 2.25kg Hammer weight
- Can be used in the following formats:
-
Sale!
Contents:- 1pcs double end ratchet wrench inclues 8mm & 10mm hex bit drivers 3pcs PH screwdriver bits - #1, #2, #3; 3 pcs Flat screwdriver - 4, 5.5, 6.5mm; 5pcs Hex bits - 3, 4, 5, 6, 8mm; 6pcs Security torx bits - T10, T15, T20, T25, T27, T30; 12 pcs Sockets : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10. 11, 12, 13mm 1pcs 1/4" sq dr socket adaptor, 1pcs 1/4" sq dr extenstion
-
Professional diagnostic tool using non-intrusive ultrasound to inspect & isolate difficult to find sounds non-audible to the human ear- Sound is converted to audible level & LED bargraph indicates intensity & direction of sound
- Not affected by ambient noise - eg radios, voices, wind, traffic noise etc
- Contains: transmitter & receiver, headphones, aluminium contact probe, aluminium air/acoustic probe & storage case
-
Sale!
- For Mercedes A, B, C, & E models
- Special top bracket and lower jaw
-
Sale!
- For Mercedes C Class 2010-
-
- For high compression springs (ie close coils) as commonly found on Honda, Toyota etc
-
Sale!
- Set of 6 specialist cap adaptors:
- ALB560-11 (Applications: Nissan Qashquai 2009-, Primera, Radius, X-Trail, Renault Koleos)
- ALB40014 (Applications: Nissan Pixo 2009-, Suzuki Alto / SX4)
- ALB40015 (Applications: Nissan Micra 2011-, Nissan Kubistar, Cabstar, Urvan)
- ALB30903 (Applications: Standard E20 thread Eurocap)
- ALB30912 (Applications: Ford Fiesta 2010 onwards)
- ALB40162 (Cross brand adaptor)
-
Sale!
Steering Wheel Lockout with integral Warning Sign. A high visibility warning to alert unauthorised personnel that the vehicle is being serviced or repaired, therefore should not be moved or started. The sign is an integral component of the key locked steering wheel immobiliser to prevent unauthorised removal.- “Technician in charge” can be inserted on the sign
- Dry-wipe Marker Pen included
- Supplied with 2 keys
-
Sale!
- A wide-ranging tap & die set complete with essential accessories for completing the job
- 7pcs tap sizes- M3, M4, M5, M6, M8, M10, M12
- 7pcs die sizes- M3, M4, M5, M6, M8, M10, M12
- Taps & dies manufactured from high carbon steel
- Supplied with 2x tap chucks & 1 x die holder
- Kit includes a quick release 1/4" sq dr ratchet, extension bar 75mm & 2.5mm hex key
-
A specialist Technicians set of tools - for checking & measuring disc & pad thickness & for cleaning discs & calipers:- ALB40029 Digital brake disc measurement caliper (0-60mm)
- ALB30802A Brake disc run-out gauge & magnetic base
- ALB30992 Brake lining thickness guide tool
- ALB40232 Brass Wire Brush for caliper cleaning
- ALB30861 Wheel stud & disc cleaning set
-
Sale!
- Telescopic action tube cutter
- Ideal for cutting close to old flared pipe ends
- Includes spare cutter wheel & foldaway de-burring blade
- Pipe diameter range: 3–32mm (1/8” – 1 1/4”)
-
Sale!
- Suitable for the removal of vehicle computer connectors and terminals.
- This 12 piece kit has a general application for safe and fast removal of terminals on a wide range of vehicles.
- Colour coded aluminium handles make for easy identification.
-
- Malleable iron head fitted with 2 x copper cylindrical faces
- Faces and head combine to provide the weight for the blow, while the copper faces prevent damage to expensive components and assemblies
- Ideal where a heavy blow is required combined with a relatively small striking area
- Faces designed to wear and can be replaced
- Use as a general purpose soft faced hammer in automotive and general engineering for assembly, repair and maintenance
- Size No. 2 - 38mm ( 1 1/2")
- Faces - 1260gms - 300mm (12" shaft)
-
- A range of High Quality Trolley Jacks, with additional built-in safety features:
- Multi-position ergonomic handle with rubber comfort grip
- Low noise Polyamide Wheels (steel wheels on 6Tonne model)
- Tools holding tray on all models
- Food Pedal for fast approaching lift to load height
- "Dead man" safety lowering control system
- Safety overload & hydraulic stroke limitation
- Made in EU - manufactured to EN1494 European standards.
-
Sale!
- Pressure test kit for testing turbo system pressure and identifying leaks within the system
- Set of 8x system connectors: 4x test and 4x closed
- Diameter range: 55-94mm
- Connectors have rough surface to allow for better grip within turbo hose end
- Use with any standard pressure pump from the Alba pressure testing range or can be connected direct to compressed air system with a suitable pressure regulator
-
Sale!
- Prevents tyres & wheels being fitted incorrectly
- Identifies each tyre wheel & its position on the vehicle, as per the TPMS system
- Safety releases air from TPMS valves
- Colour coded & marked : LR - green, LF - yellow, RR - blue, RF - ref
